Caterpillar Duo Cone Seal Installation

Seekpart.com Duo cone mechanical face seals for komatsu, cat, volvo, hitachi. 800 × 600 - 51k - jpg cat.com Cat Cat速 Seals Caterpillar 358 × 269 - 15k talk.newagtalk.com Viewing a thread - My horse pulled up lame (pics) 1024 × 768 - 209k - jpg 777parts.net 1330441 SEAL GROUP- DUO- CONE - Caterpillar spare part 777parts 600 × 467 - 8k - jpg ebay.com Caterpillar 198-7155 Duo- cone Seal Installer eBay 1488 × 1600 - 249k - jpg 777parts.net 1U6439 INSTALLER AS- DUO- CONE SEAL - 1u6439 - Caterpillar spare. 600 × 772 - 13k - jpg avspare.com Duo- Cone Floating Seals. 657E SCRAPER POWER TRAIN Caterpillar. 252 × 247 - 32k - png sealgroupsupplier.com 309-7664 Caterpillar Duo Cone Seal, 76.94 H-84 Mechanical Face Seal 800 × 800 - 891k - png 777parts.net 6G2950 DUO CONE SEAL GROUP - WHEEL TRACTOR-SCRAPER Caterpillar. 600 × 356 - 9k - jpg sealgroupsupplier.com 1497 Duo- Cone Seals for CAT 320, Heavy Duty Dual Face seals 1000 × 1000 - 219k - jpg avspare.com Duo- Cone Seals - Install. 789C Off-Highway Truck Machine Systems.

325 × 200 - 31k - png cat.com Cat Cat速 Seals Caterpillar 358 × 269 - 18k sealgroupsupplier.com Floating Seal, Seal for Caterpillar, Seal Of Chinese Seal Supplier 1000 × 1000 - 286k - jpg sealgroupsupplier.com cone Seals for D7h Rollers Sprockets, CAT Duo cone seals 800 × 800 - 301k - jpg sealgroupsupplier.com Track Roller Seal Group, Caterpillar Duo Cone Seal Manufacturer 800 × 800 - 521k - png sealgroupsupplier.com Seal Ring for Komatsu, Duo Cone Seal for Hitachi, Seal Group For. 600 × 600 - 181k - jpg sealgroupsupplier.com Replacement Parts 114-1497 Duo Cone Seals 1000 × 1000 - 282k - jpg cat.com Cat Wide Variety of Cat速 Duo-Cone™ and Heavy Duty Dual Face.

358 × 269 - 10k sealgroupsupplier.com Floating Seal, Seal for Caterpillar, Seal Of Chinese Seal Supplier 1000 × 1000 - 214k - jpg avspare.com Duo- Cone Seals - Install. 789C Off-Highway Truck Machine Systems. 325 × 200 - 23k - png.

How To Crack Steam Accounts 2015. Avoid prolonged skin contact with isopropyl alcohol. Avoid breathing the vapors in enclosed areas without adequate ventilation and do not smoke. Isopropyl alcohol is flammable. Do not use near open flame, welding operations, or around heated surfaces exceeding 482°C ( 900°F). • Remove any film, dust or other foreign matter from the following components: • Rubber toric ring (2) • Housing ramp (4) • Seal ring ramp (7) • Housing retaining lip (3) • Seal ring retaining lip (8) • Seal ring housing (5) Note: Seal rings have very sharp edges. Protective gloves should be worn in order to prevent injury.

Use isopropyl alcohol or other approved cleaning agents. Use a clean lint free cloth for wiping.

Warning: Invalid argument supplied for foreach() in /srv/users/serverpilot/apps/jujaitaly/public/index.php on line 447.

All components should be completely dry before proceeding. Note: Never permit oil to contact rubber toric ring (2), housing ramp (4) or seal ring ramp (7) before both seal rings (1) are assembled in the final position. Illustration 3 g00446488 • Put rubber toric ring (2) on seal ring (1). Make sure that the rubber toric ring is positioned at the bottom of seal ring ramp (7). The rubber toric ring must rest against retaining lip (8). The rubber toric ring must be straight in the seal ring. The rubber toric ring must not be twisted.

Note: Be careful when you are working on the rubber toric ring. Nicks, cuts or scratches may cause leaks. • Refer to Special Instruction, SEHS8484, 'Tool and Specification Chart for Conventional Duo-Cone Seals' in order to select the proper installation tool.

Illustration 4 g00534621 Use towels or a mat (A) that is made of foam to aid with installing the toric ring (2 ). • Install rubber toric ring (2) on seal ring (1) with installation tool (9). Lightly dampen the lower half of rubber toric ring (2) with an appropriate lubricant. Refer to the 'Acceptable Lubricants for Assembly' section that is in this publication for additional information.

Use the following techniques in order to dampen the rubber toric ring: • Wipe the seal with a lint free cloth. • Place towels or a mat that is made of foam at the bottom of a container. Soak the towels or the mat with the lubricant. Dip the rubber toric seal in the container.

Note: Periodically inspect the installation tool for damage. If necessary, replace the installation tool. Illustration 5 g00534622 • Make sure that the lower half of rubber toric ring (2) is still wet. Use installation tool (9) in order to position seal ring (1) and rubber toric ring (2) squarely against seal ring housing (5). Make sure that you use sudden pressure and even pressure when you press a toric ring that has a small diameter.

Press rubber toric ring (2) under housing retaining lip (3) that is part of seal ring housing (5). Astro 25 Portable Cps Software Download. Use the following steps in order to install a rubber toric ring that has a large diameter: • Push the rubber toric ring over the seal ring retaining lip on one side.

• Tap the installation tool with a rubber mallet on the opposite side of the rubber toric ring. Tap until the rubber toric ring is past the seal ring retaining lip of the housing. Illustration 10 g00446495 • Wipe seal ring face (6) that is part of seal rings (1) by using a lint free cloth. No particles of any kind are permissible on the sealing surfaces. A small piece of paper from a paper towel can force apart the seal ring face, which will cause a leak. Note: Rubber toric ring (2) must never slip on the ramps of seal ring (1) or the ramps of seal ring housing (5).

In order to prevent slippage, allow adequate time for evaporation of the lubricant before proceeding with the procedure. Once the rubber toric ring is correctly positioned, the rubber toric ring must roll only on the ramps. Avoid prolonged skin contact with isopropyl alcohol. Avoid breathing the vapors in enclosed areas without adequate ventilation and do not smoke. Isopropyl alcohol is flammable. Do not use near open flame, welding operations, or around heated surfaces exceeding 482°C ( 900°F). Note: Do not use any liquid that leaves an oil film.

Do not use any liquid that does not evaporate quickly. All of the guidelines for safety and all of the guidelines for disposal must be followed when you use a flammable liquid. The following liquids are acceptable lubricants for assembly: • Quaker Solvo Clean 68-0 • Houghto-Grind 60 CT • Isopropyl alcohol Some seal kits come with silicone toric rings. Silicone toric rings can be chilled for easier installation. This will allow the toric ring to contract for easier installation.

Seals should be placed in a freezer for 5 minutes. Temperature in the freezer should be between -40°C ( -40°F) to -18°C ( 0°F). Chilling should be done prior to installation.

Contraction will be sufficient to allow installation. The seals should be allowed to warm to room temperature prior to further assembly. Illustration 13 g00446498 The slipping of the rubber toric ring on the housing ramp or on the seal ring ramp may result in uneven pressure on the seal face.

Uneven pressure on the seal face causes galling, scoring, and leakage. If the rubber toric ring slips at one location but not all the way around the seal ring, the toric ring will twist.

The twisted toric ring could be cocked. Seals that are cocked will cause uneven pressure on the seal face. Seals that are cocked may also cause possible galling, scoring, and leakage. The twisted toric ring could oscillate when the ring is rotated. Seals that oscillate may allow dirt into the seal joint. This is caused by the pumping action that is created by the toric ring that is oscillating.