Clonezilla Software Raid 0 Cpu

Disk migration software; Can I use the disk cloning software from inside another OS; Cloning software for SSD; Would it be the best recovery software for Raid? Are you trying to recover data from the client computer backup database? If so, you pretty much out of luck if any part of the database was housed on the failed drive.

I'm not sure if this is the correct area to post so move the topic as needed. Ok, here is the situation. I work in the tech department for the College of Education at a well known University. I've been instructed by my boss to find a way to do multiple Hard Drive cloning over a network in order to setup our computer labs. We have right about 85 PC's or so that would need to be cloned.

I've looked at Symantec Ghost Solution but I'm not sure if I need everything it offers and at $40 a license things can get fairly expensive. I'm not really looking at 'managing' the PC's after the clone I just need to be able to do the clone and leave them alone. That make sense? If not, I can try to clarify a but more. Is there any freeware that can do this?

And keep in mind that, although I work in the tech department, I'm still somewhat fresh to networking so simplicity would greatly be appreciated. Some other things to consider: These PC's will have Windows XP. Windows Vista would be nice, but XP is a must. Die Bestie In Menschengestalt Free. The current solution we have right now is doing an actual Mirror Image/Clone with the EchoPlus cloner we bought (for $1,000.-).

The problem with that is cloning each PC takes about 2 hours and there's 85 of them. Not counting the time it takes to remove the HDD's from the system. It would also be great if the software was able to store multiple images on the server. This way I can setup a specific image for each type of PC.

The computer lab PC's are all the same model so 1 image will suffice. But I also work on several different office PC's in my day-to-day work where I generally have to do a full re installation of windows (about 5 hours of work).

I would love to be able to store an image for each type. Like: image for a Dell GX270 image for Dell 8400 image for Dell Latitude laptops image for Sony Vaio etc. And then be able to access each image when needed to do a clone. So, in short: Priority 1: Clone multiple PC's together over the network from a single image Priority 2: Clone different PC's from different images over the network (does not need to be at the same time). Any advice would be greatly appreciated.

Thanks in advance! If you are looking for true freeware, you should give partimage (part of the systemrescuecd) and clonezilla a look. I have had a bit of experience with partimage, not much with clonezilla but they both work pretty similarly. They are both free, based off linux and they both support PXE booting in order to image hard drives across a network. For partimage, you can also set up autorun scripts in so that each specific model can pick up the correct image from the server.

However, partimage can be pretty difficult to use. You'll have to make sure that it's compatible with your network card before you can use it to distribute images across a network, but if you're mostly using generic Dell desktops, you should be fine. All the documentation for partimage is here. This might be assuming much but I'd like to believe that a University would at least have computers that have PXE support. If thats true, then its just a simple matter of using RIS which is included as part of Windows Server 2003 (which I'm sure a University has access to - once again. I might be assuming too much). Remote Installation Service is a neat little feature that Microsoft created to solve both of your problems with relative ease.

Just the Tech Net article for RIS, explains what it is, how to use it and all those nice little things. Thanks for the advice guys. A couple of questions: Is RIS available on the Standard Version of Windows Server 2003? Any user guides out there? Are there any user guides for Partimage and Clonezilla as well? I'm a very fresh Linux user so I have not the slightest clue on making a script or how I could use either program.

I think I'm going to download the Linux version which includes both tools and snoop around for some hands on but are there any quick steps I should note to help guide my way? Do I just store the image on a shared drive and task to it somehow? HundredIslandsBoy: How did you clone your Hard Drive? Can you verify how long it took to do it? I'm specifically interested in knowing how many steps it would take to use these tools.

Like, will I be needing 85 Linux CD's to boot to in order to do the image? Thanks again guys.

Clonezilla is one of the greatest Open Source backup tool for Linux. The absence of a Graphical User Interface combined with a simpler, fast and intuitive guided command line wizard that runs on top of a live Linux Kernel makes it a perfect candidate back-up tool for every sysadmin out there. With Clonezilla, not only you can perform a full backup of a device data blocks directly to another drive, also known disk cloning, but you can also backup entire disks or individual partitions remotely (using SSH, Samba or NFS shares) or locally to images which can be all encrypted and stored in a central backup storage, typically a NAS, or even on external hard-disks or other USB devices. Suggested Read: In case of a drive failure the backed-up images can be easily restored to a new device plugged-in into your machine, with the remark that the new device must meet the minimum required space value, which is at least the same size that the failed backed-up drive had.

In simpler terms, if you clone a 120 GB hard-disk which has 80 GB free space, you can’t restore the backed-up image to a new 80 GB hard-drive. The new hard drive which will be used for cloning or restoring the old one must have at least the same size as the source drive ( 120 GB). Suggested Read: In this tutorial we are going to show you how you can clone a block device, typically a hard-disk on top of which we run a CentOS 7 server (or any Linux distribution such as RHEL, Fedora, Debian, Ubuntu, etc.). In order to clone the target disk you need to physically add a new disk into your machine with at least the same size as source disk used for cloning. Requirements • Clonezilla ISO image – • New Hard Drive – physically plugged-in into the machine and operational (consult BIOS for device information) Suggested Read: How to Clone or Backup CentOS 7 Disk with Clonezilla 1. After you download and burn Clonezilla ISO image to a CD/DVD, place the bootable media into your machine optical drive, reboot the machine and press the specific key ( F11, F12, ESC, DEL, etc) in order to instruct the BIOS to boot from the appropriate optical drive.

The first screen of Clonezilla should appear on your screen. Select the first option, Clonezilla live and press Enter key to proceed further. Select Disk to Local Disk Cloning 9.

On the next screen you must choose the source disk that will be used for clone. Pay attention at disk names used here. Xpadder 5 8 Rapidshare Downloads here. In Linux a disk can be named sda, sdb etc, meaning that sda is the first disk, sdb the second and so on. In case you’re not sure what’s your source disk name you can physically examine the source disk name and serial No, check SATA port cabling on the motherboard or consult the BIOS in order to obtain disk information. In this guide we’re using Vmare Virtual disks for cloning and sda is the source disk that will be used for cloning. After you successfully identified the source drive press Enter key in order to move to the next screen.

Hi, I ran into trouble with a clone (Macrium Reflect) of a Windows machine (7 updated to 8.1) dating from 2013. It seems the problem is related to the UEFI boot system (which can also make double-booting difficult for non specialists). The solution requires you to have boot from the rescue media, which all of us think of preparing in advance and storing somewhere we can find it I wanted to know if you might need a separate boot CD or key when cloning an exclusively Linux machine that has UEFI. It’s necessary to be quite clear about this for ordinary users, because though the best advice is always to test your cloned copy before putting it in the cupboard, people might be tempted not to do that because they don’t feel confident enough to open up and so risk damaging their computer. I recall a similar rule, one cannot perform sector to sector clones on Windows computer with GPT partitioning (UEFI).

Believe that’s where Christopher Lee is coming from, one of the values (or partition identifiers) must be unique to be usable, though since I also use Macrium, have read some articles on this. Am not 100% for certain which of the partitions (probably one of the first three small ones) that MUST not be cloned sector to sector.

Rather a ‘Smart’ clone that knows how to workaround the issue. However, the focus here is cloning Linux, is a non-dual boot, do these OS’s have the same partitions(s)?